Andrew Barclay - No.3 “Brian Harrison” - Overhaul

The Association’s steam locomotive “Brian Harrison” No.3 has been withdrawn from traffic to begin its 10-year overhaul following the expiration of its boiler certificate. This is the first steam locomotive which was restored and operated by the Association.

 

Its brother locomotive "Henry Ellison" is currently the only steam locomotive which is operational that is looked after by the Association which performs brake van rides and driver experiences on the Ravenstor incline at weekends.

 

The Association would like to return this reliable locomotive to service as soon as possible to cover the demands of the 2020 season.

History

These small steam locomotives were built at the Caledonia Works, Kilmarnock, of Andrew Barclays and Sons Ltd in Scotland. They are 0-4-0 wheel arrangement saddle tank engines (meaning the water tank is on top and around the boiler).

 

“No 3: Brian Harrison” spent its working life at the Central Electricity Generating Board‟s Power Station at Ferrybridge near Knottingly in Yorkshire, a period of some 16 years, before being replaced in about 1970 by diesel engines. Brian Harrison was despatched to store at Tinsley in Sheffield it remained for some 35 years until being acquired on long term loan by the Ecclesbourne Valley Railway Association, who have agreed to restore it.

 

There are a large number of this type of locomotive in preservation, in particular with the Ayrshire Railway Preservation Society, the Swindon and Cricklade Railway, Bowes Railway, East Anglian Railway Museum, Buckingham Railway Society etc.

 

Brian Harrison had been kept under cover and its livery is intact. It has been restored to working order with the passing of its boiler certificate in 2009 and entering traffic in early 2010.

 

She has now been withdrawn again at the end of her 10 year ticket with a view to doing work necessary to bring her back into traffic once again.

Current Overhaul Progress

The locomotive has been stripped down with all the cab controls, clack valves and external piping being removed. The water tank and cab roof have been lifted off to allow the boiler to be removed.

 

The boiler has been returned to the railway and has been reintegrated with the chassis at Wirksworth. The boiler has been upgraded to operate at a maximum of 180 psi from its 160 psi working pressure prior to its overhaul. The rest of the locomotive has been inspected for wear and is now being reassembled to be used for the 2020 season.

Donate to our 'Locomotive and Carriage Club'

'here' and help to bring No.3 back into steam.

Registered Address:
Ecclesbourne Valley Railway Association
Wirksworth Station
Coldwell Street
Wirksworth
Matlock
Derbyshire
DE4 4FB
United Kingdom
 
01629 823076.
 
© 2020
No.3 when it was operational. Photo Credit: Joe Carver